Boom Lift License Penticton - In order to operate an aerial boom lift, operators should be qualified through training that can be attained utilizing both practical training and classroom sessions and by attaining a boom lift license. Instruction should be given with respect to the type of aerial lift which would be used on the job. A License is required for anybody who works on or operates an aerial boom lift.
Vehicle-mounted aerial devices consist of the following work vehicles: aerial ladders, extensible boom platforms, articulating boom platforms, vertical towers, and whatever combination of these kinds.
When making use of a boom lift, there are several basic safety rules which apply to all boom lifts. Safety of the worker is a main concern whilst they are working within the basket. The worker must at all times have on a body harness and lanyard, connecting it to the boom or basket. Never tie off to an equipment, an adjacent pole or a structure. Workers should stand on the floor of the basket, and never sit or climb on the basket edge. The manufacturer's load restrictions must be adhered to.
Aerial lift operators must be authorized to make use of the machines. The operator should be familiar with all the aspects of the device and must have access to the manufacturers manual which must be kept inside the lift. Operators are responsible for making certain that safety measures are followed in operating the lift. A daily test of lift controls must be carried out. Position outriggers and set brakes (if they are utilized) on a stable surface or on pads. If working on a slope, utilize wheel chocks.
Never move an aerial lift truck with an elevated boom while employees are within the basket. Articulating boom and extensible boom platforms utilized as personnel carriers must have accessible, plainly marked, upper controls. Except for in emergency circumstances, lower controls should not be used to override upper controls unless the person within the lift gives permission.
While working from an aerial lift, do not wear pole or tree climbers.
The insulated part of the aerial lift should not be altered.
Ensure that the booms are carefully checked, that the machinery is correctly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make sure that the lines are di-electrically tested according to local regulations.